Product Categories
Social Media

5 Mil Kapton Tape

Kapton tape /Polyimide tape are made from polyimide film with Silicone adhesive. They have been used in applications at temperatures as low as -100°C (-212°F) and as high as 260°C (500°F). The polyimide tape in high performance, reliability and durability, with a unique combination of...

Chat Now
Product Details

Kapton tape /Polyimide tape are made from polyimide film with Silicone adhesive. They have been used in applications at temperatures as low as -100°C (-212°F) and as high as 260°C (500°F). The polyimide tape in high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environments. 


5 mil kapton tape Product Details

Kapton tape /Polyimide films make innovative design solutions possible in a range of industries including, consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications. Polyimide tape have a high dielectric strength. Silicon adhesive protection leaves no residue.

5 mil kapton tape

5 mil kapton tape with UL

Test item

Test result

Standard

Adhesion to steel

20 oz/inch ( 22N/100mm)

GB/T 2792-1998

Tensile strength

30 lbs/inch ( 533N/100mm)

GB/T 7753-1987

Elongation at break

> 40%

GB/T 7753-1987

Backing thickness

1mil (0.025mm)

GB/T 7125-1999

Total tape thickness

2.5 mil ( 0.06mm)

Temperature range

-100o ~ 500oF (-73o ~ 260oC)

GB/T 7125-1999

Dielectric strength

6KV

GB/T 14517-1993

Flame retardency

Pass


Note: The above technical information and data should be considered representative or typical only, and should not be used for specification purposes.If you have used this product for other purposes, our Company will not take responsibility.

5 mil kapton tape

5 mil kapton tape Features

• Polyimide film is dimensionally stable at high temperatures

• Flame retardant, chemical and radiation resistant

• Silicone adhesive’s high temperature performance reduces adhesive transfer

• Polyethylene tape core instead of cardboard

• Gold tab protection during wave solder of printed circuit boards. 

• RoHS compliant


5 mil kapton tape Application Ideas 

• Mask for protection of gold fingers of printed circuit boards during wave solder, solder reflow or solder dip process.

• Release surface in fabrication of parts cured at elevated temperatures.

5 mil kapton tape


5 mil kapton tape Storage 

Store under normal conditions of 60° to 80°F (16° to 27°C) and 40 to 50% R.H. in the original carton. 


5 mil kapton tape Storage 

To obtain best performance, use this product within 2 years from date of manufacture.


Hot Tags: 5 mil kapton tape, suppliers, manufacturers, factory, wholesale, customized
Related Products
Inquiry